|A series of new LED lighting standards have recently been implemented or will be implemented|
In all industries, innovation is the first sign of progress. In fact, in the process of development, certain old standard rules will gradually be untimely; There will also be some new phases, which will require new content specification adjustments...
In the LED lighting industry, the accelerated test method for LED lighting products will save a lot of test time for LED lighting enterprises in China. The reliability test method of LED lamps will also have guiding significance for verifying product reliability and improving the quality of LED lamps. The new "lighting design and testing standards for sports venues" jgj153-2016 will also replace the original "jgj153-2007"...
Recently, a series of new industry standards have been implemented or will be implemented this year.
The accelerated test method for light-flux attenuation of LED lighting products will be implemented
On May 12, 2017, the national standard committee issued "the national standard of the People's Republic of China announced in 2017 the 11th", LED by semiconductor lighting joint innovation national key chamber of the national standard GB/T33720-2017 the luminous flux attenuation accelerated test methods of LED lighting products, for implementation on December 1, 2017. According to the introduction, this standard has saved China's LED lighting enterprises a great deal of testing time, which is of great significance to reduce the research and development cycle and cost of the enterprise, and accelerate the development of LED lighting industry.
GB/T33720-2017 "luminous flux attenuation accelerated test methods of LED lighting products is the national key laboratory of semiconductor lighting joint innovation" semiconductor lighting products accelerated reliability testing and analysis of "the universal research achievements, to judge the LED lighting products quickly and efficiently flux attenuation features provides a set of reasonable and feasible test method, the reliability evaluation precision is not affected under the premise of the traditional test time of the 6000 h and 2000 h, and the stability of the color of the LED lighting products, and other subsystems, such as the power drive, the cooling structure and the reliability of the secondary optical design has established the basic requirements, can be widely used in the market most of the indoor LED lighting, road lighting lamps and lanterns and special lighting lamps and lanterns.
The standard drafting unit: semiconductor lighting joint innovation state key laboratory of semiconductor lighting technology promotion center (Beijing), changzhou wujin district semiconductor lighting application technology research institute, hebei khalid electronics Co., Ltd., Shanghai times of lighting electrical appliance Co., Ltd., institute of semiconductors, Chinese academy of sciences, Hangzhou Everfine Photo - E - Info Co., Ltd., national semiconductor device quality supervision and inspection center, guangzhou west standard testing research institute Co., Ltd., xiamen hualian electronics Co., Ltd., Foshan Nationstar Optoelectronics Co., Ltd., the Elec - Tech International Co., Ltd., huizhou leishi photoelectric technology Co., Ltd., nanjing science and technology Co., Ltd., ningbo liaoyuan Henderson lamps Co., Ltd., ningbo three Ann photoelectric spectrum photoelectric semiconductor Co., Ltd., Co., Ltd., shanxi gyu semiconductor lighting Co., Ltd., Shanghai yaming lighting Co., Ltd., sichuan jiuzhou Optoelectronics technology Co., Ltd., wuxi HuaZhaoHong photoelectric technology Co., Ltd., Ledman Optoelectronic Co., Ltd., Unilumin Group Co., Ltd., Shenzhen Mason Technologies Co., Ltd., Shenzhen poly lighting Co., Ltd.
This standard is mainly to Yuan Changan, Qian Cheng, xue-jun fan, kouchi zhang, Xu Shaowei, li bo, thorough, xiao-dong zhu, jay huang, YuAnQi, gao wei, FanJiaJie, jin-min li, Wang Junxi, Zhao Lixia, jian-gen pan, Zhao Lubing, Zhou Gang, kit, li cheng, Xie Wei, growth, Han Licheng, Sun Jianjiang, strong NiuHong, Cai Weizhi, nurse xu min, Zhu Huarong, Zhong Xiong, Chang Baoyan, TuMengLong, li hai, John li, Alan wong.
The reliability test method of LED lamps will be implemented
On December 1, 2017, according to the general administration of quality supervision, inspection and quarantine and national standards committee issued by the national standard of the People's Republic of China announced in 2017 the 11th ", new recommended national standards GB/T33721-2017 "LED lamps and lanterns of reliability test method" will be officially implemented. According to introducing, GB/T33721-2017 "LED lamps and lanterns of reliability test method", according to the environmental conditions that may be sustained by a LED lighting products, established the temperature cycle test, switch test and accelerated life test and so on nine alternative environmental testing project, and the specific test conditions, test method and evaluation parameters such as the setting.
The standard power supply voltage not over 1000 v in indoor and outdoor LED lamps and lanterns is the reliability of the general test method, applied to the reliability test of LED lamps and lanterns, can be used according to the product characteristics and environment, select the relevant reliability test items, to verify the product reliability, has guiding significance for improving the quality of LED lamps and lanterns.
The standard drafting unit: Shanghai times lamps and lanterns of testing light lighting electric appliance co., LTD., the state administration of quality supervision, inspection center, national electric light source quality supervision and inspection center (Shanghai), changzhou institute of photoelectric technology, general electric lighting co., LTD., dow corning (China) investment co., LTD., dongguan city, guangdong province quality supervision and inspection center, philips lighting (Shanghai) co., LTD., changzhou city product quality supervision and inspection institute co., LTD., guangzhou "west photoelectric test standards, opple co., LTD., Shanghai yaming lighting co., LTD., leishi lighting (China) co., LTD., warom technology co., LTD., zhejiang sunshine lighting electric appliance group co., LTD., jiangsu halma lighting technology co., LTD., marsh green lighting co., LTD, taizhou huaqiang lighting equipment co., LTD.
Main to the standard for the army, zhang, li Lv Guwei, ZhangHaiCong, zhong-kai li, danger, ben-liang li, SangGaoYuan, chao-yang shi tao again, Zhou Gang, tripod, Zhu Huarong, growth and Li Miaohua, Chen ping, Gong Piao, Xu Jianxing, Jackie chan, NiWei, sisia shi, Chen.
The lighting design and testing standards of sports venues will be implemented soon
On June 1, 2017, the standard for lighting design and inspection of sports venues, which was issued by the ministry of housing and construction in December, will be implemented formally. According to introducing, the chief editor of the China construction science research institute of engineering construction industry standard "stadium lighting design and testing of the standard" has been released on December 15, 2016, number of JGJ153-2016, since June 1, 2017. Among them, articles 4.4.11 and 4.4.12 are mandatory and must be strictly enforced. The original "standard for lighting design and testing of gymnasium" jgj153-2007 was also repealed.
The standard is according to the housing and urban-rural development on the printing of engineering construction standards in 2014 and revised plan notice (building standard  no. 2013), by China construction science research institute under the state council in conjunction with the relevant units of the original industry standard "sports lighting design and testing of the standard" JGJ153-2007 to conduct a comprehensive revision. Nine chapters three appendix of this standard, the main contents include: general provisions, terms and symbols, and basic rules, lighting, lighting light source and lamps and lanterns, layout and set requirements, lighting energy saving lamps and lanterns, lighting distribution and control and lighting detection, etc.
The main contents of the revised standard include the following: 1. Adjusting the standard value of lighting standard and partial lighting standard according to the type of venue; 2. Increased the standard value of lighting for winter sports; 3. Increase the technical parameters and requirements of LED applications; 4. Modified the layout of lamps and lanterns, and the requirements of the setting of horse and lamp posts; 5. Increase the method of location setting and design parameters; 6. Increased lighting energy saving section and lighting power density limit; 7. Improved lighting distribution and control requirements; 8. Adjust the illumination measuring point layout method and increase the lighting power density detection.
The standard editorial unit is the China architecture science research institute and shenzhen jianan (group) co., LTD.
The standard participated units for Beijing architectural design and research institute, Chinese architectural design institute Co., Ltd., east China architectural design and research institute, China central television (CCTV), informed (Beijing) international architectural design consulting Co., Ltd., China group Co., Ltd., philips (China) investment Co., Ltd., general electric (China) Co., Ltd., thorn Lighting (guangzhou) Co., Ltd., Beijing optimal Lighting equipment Co., Ltd, musco Lighting Co., Ltd., Shanghai yaming Lighting Co., Ltd., dongsheng group, Shanghai light lamps Co., Ltd., shanxi gyu semiconductor Lighting Co., Ltd., Dongguan Kingsun Optoelectronic Co., Ltd., zhejiang dafeng sports equipment Co., Ltd., Beijing letter can sunshine new energy Technology Co., Ltd., shenzhen overclocking three Technology Co., Ltd., huizhou leishi photoelectric Technology Co., Ltd., shenzhen Ocean 'S King Lighting Science & Technology Co., Ltd., fujian hong bo photoelectric Technology Co., Ltd.
Part 1: general requirements and tests are implemented in gb7001-2015
On January 1, 2017, issued by the China quality certification center of lamps and lanterns product compulsory certification implementation the new standard GB7000.1-2015 "lamps and lanterns is part 1: general requirements and test" formally implemented, the implementation of alternative GB7000.1-2007 as of the date of the lamps and lanterns, part 1: general requirements and test.
According to the "about lighting products according to the new standard GB7000.1-2015 implementation of the compulsory product certification of technical resolution (TC05-2016-01), the new and the old standard, there are many differences among them, the most typical four, including plaque marking significant change, enterprises are very familiar with the marker in GB7000.1-2015 - F series no longer use, warnings to visual design. As well as clear blue ray hazard requirements, reduce the SELV power path requirements, and do not allow for the grounding of the built-in control device.
Lamps and lanterns of the part of the drafting unit for national quality supervision and inspection center, Shanghai times testing light lighting electric appliance co., LTD., the state electric light source quality supervision and inspection center (Shanghai), warom technology co., LTD., the national center for quality supervision and inspection of lamps and lanterns (zhongshan), Shanghai yaming lighting co., LTD., leishi lighting (China) co., LTD., opple co., LTD., philips lighting (Shanghai) co., LTD., Shanghai think electronic engineering co., LTD., zhejiang sunshine lighting electric appliance group co., LTD., dongguan city, guangdong province quality supervision and inspection center, zhejiang shenghui lighting co., LTD., set marsh green lighting co., LTD., zhongshan city, guang Yang electrical appliance co., LTD., jiangsu landscape energy-saving service co., LTD., shandong Ming hua electric technology co., LTD., ningbo far east lighting co., LTD., ningbo love makes electric appliance co., LTD., zhejiang KaiYao lighting co., LTD.
This part is mainly to medium and sisia shi, jun-bin zhang Chen, Peng Zhenjian, SangGaoYuan, Li Miaohua, Zhu Huarong, growth, tripod, lu, Xu Li, ben-liang li, Huang Xian army, Chen Shaofan, Xu Jianxing, wei-shing Chen, Wang Yinfang, Huang Jianzhong, Dai Wenliang, liu, Yang Yue, danger to tao, li for the army, profit-structure, Liu Erli, LingLi, Liu Shiming, heavens, fredy.
The European Union's new standard lighting standard, en60598-1:20, will be implemented
On October 20, 2017, eu version of general lamps and lanterns standard EN60598-1:15 will be the end of the transition and enforcement, this version than before EN60598-1:20 08 did more technical revision, contains some important technology changes, including the LED lamps and lanterns on the constructor is given new requirements, light biological safety requirements and according to different types of insulation between the circuits is given more precise requirements, and so on. One of the biggest changes is the first inclusion of photobiological safety into mandatory standards.
New standards, if use including leds, metal halide lamp and some special tungsten halogen lamp and so on it is not exempted from the light source of lamps and lanterns of evaluating the retina, should according to IEC/TR62778:2012 "the light and the light of lamps and lanterns application in biological safety blu-ray damage assessment" assessment, and unfavorable use blu-ray hazard category than RG2 light source.
Blue light may have three effects on human eyes: one, excessive blue light may cause visual fatigue; Secondly, it may affect the physiological development of the eye. Three, long-term in this kind of light environment work, the likelihood that causes eye macular degeneration in old age increases.
It is also understood that the eu has taken the lead in raising the safety of light biosecurity to the high standards of compulsory standards, and it is expected that other countries and regions will follow suit. The eu standard change will greatly increase the production and testing cost of enterprises. Once the quality of the product has not met the standard requirements, it will be subject to economic losses and even a blacklist of the European Union.